Introduction of Milliohm Multimeter METRAHIT IM XTRA
1. Up to 3.1GΩ insulation resistance test function, with interference voltage detection, output voltage: 50, 100, 250, 500 and 1000V according to DIN EN 61557-2 / VDE 0413-2
2. DAR: Dielectric Absorption Ratio, PI: Polarization Index
3. 4-wire milliohm measurement (Kelvin connection), 200mA or 1A measurement current, can accurately measure very small resistance with a resolution of 1μΩ
4. According to DIN EN 61557-4 / VDE 0413-4, 2-wire Rlo measurement, 200 mA test current
5. Short coil test with 1000 V and optional COIL adapter
6. Multifunctional measuring instrument (V, A, Ω, F, Hz, %, RPM, °C/°F)
7. True RMS AC/AC+DC current/voltage measurement up to 10/100 kHz bandwidth
8. Low-pass filter can be activated for 1 kHz (-3 dB) in the VAC/AC+DC range
9. DC measurement, 10 nA to 1A.
10. Use a current sensor for current measurement - 1:1 to 1:1000 variable ratio is adjustable, and the current value after the variable ratio is directly displayed on the panel
11. Capacitance measurement
12. Accurate temperature measurement - with RTD and TC-K temperature sensor, display °C and °F
13. Diode measurement (Ik= 1 mA, U flow up to 5.1 V) and continuity test
14. Overrun sound alarm
15. Obtain minimum/maximum value, DATA hold function
16. The memory module and synchronous clock can make the multimeter used as a recorder, and separate measurement storage
17. Push/Print function transmits the measured value to the software through the button
18. Sequence programming can be carried out for different test procedures
19. Color graphic display
20. Removing the backplane power supply: standard quick-change rechargeable lithium battery, optional WPC module for wireless charging, backplane battery with USB port, due to the touch protection module socket, can be used without interrupting the measurement circuit to replace
21. It is used for the automatic blocking protection ABS function of the current input port, which can prevent misoperation from burning the meter
22. The test pen has a test button with START (ISO) and STORE keys, which is easy to operate
23. The shell adopts IP52 protection, dustproof and splashproof, and the rubber holster can be replaced
24. Interface: The host integrates Bluetooth or WLAN, and the battery on the back panel has a USB interface for easy charging
25. IZYTRONIQ windows software for preparing test reports and graphic evaluation of measurements
