Does anyone know how a wood moisture tester works?
The operation method of the wood moisture tester is briefly analyzed as follows:
1. The gear setting method of the wood moisture tester: first press the gear setting button (SP E CIES), and then press the test button (TEST). At this time, the screen displays the current gear value, such as continuously pressing the setting key, the gear can be continuously changed until the desired gear.
2. Measurement: Insert the probe on the wood moisture tester into the wood sample to be measured. Then press the test key, and the value displayed by the wood moisture tester at this time is the average moisture content of the sample. If the measured sample moisture is less than 3%, the display will display 3.0, if the measured sample moisture is greater than 40, the screen will display 40, indicating that the range has been exceeded.
3. Check before measurement: Set it to level 5 according to the above method, then pull out the cap of the wood moisture tester, touch the two probes on the instrument to the two contacts on the cap, and then press the test button, if the display shows If it is 18±1, it means the instrument is normal.
