How to use smart measurement for True rms multimeter Pen type GD107 ? maybe you not know it well, today, let me introduce the details steps and may it can do some helps for you, for this GD109 pen type smart multimeter, it was just lunched on 2022.3.31, it is smart size and easy to carry it in your pocket. and if you like it can you contact with me, my email: marketing@gvdasz.com
Smart (AUTO) measurement, below is steps :
This measurement mode is default when power on. In this mode, DC voltage, AC voltage, resistance, continuity can be measured, and the meter can automatically identify the measurement signal.
1) Press "POWER ON " key to power on, display "AUTO " and enter the intelligent measurement mode.
2) Insert the red probe into “INPUT” jack and the black probe into the “COM” jack.
3) Contact the probe with both endsof the measured subject or resistance (parallel), and the meter will automatically recognize the measured signal.
When measuring the resistance, if the resistance value is < about 50 Ω, the buzzer will sound
4) Read the results from the display.
NOTE：The minimum measurable voltage of this mode is about 0.8V
