Pls take care the waring before you use GVDA DC powre supply
Warning:
1.Because the DC power supply has an adjustment delay, please turn on the DC power supply first, set the voltage/current you need, and then connect the load.
2.When setting the current, you need to first adjust the voltage of the DC power supply below 3V (Avoid sparks), and then connect the positive and negative output wires, and then you can set the desired current.
3.Turn off the DC power supply when you are not using it, and remove the power cord.
4.When cleaning the DC power supply, make sure that the power cord is removed.
5.Do not use solvents containing hydrocarbons, chlorides or similar, and not use detergents containing abrasive ingredients.
