108x148mm large diameter clamp-on ammeter function
Ultra-large caliber clamp-on ammeter, jaw size 108x148mm, is the domestic * large caliber clamp-on ammeter, can clamp φ108mm cable or 160mm × 4mm flat steel ground line, suitable for 600V and the following low-voltage line site of large cables and grounding flat steel current, leakage current detection. Range up to: 0.1mA-3200A, to meet most of the line current detection requirements, and 99 groups of data storage, RS232 interface, the realization of the stored data uploaded to the computer for easy preservation and analysis of data.
108x148mm large caliber clamp-on ammeter Functional applications
1、Data storage;
In the process of testing, press HOLD key, you can keep the LCD display, press HOLD key to keep the data at the same time, the meter is automatically numbered and stored the current data held; then press HOLD key to unlock, you can test again. The meter can store 99 sets of data, if the storage is full, the memory must be cleared before storing again.
2、Checking and deleting
After power on, press PEAK + POWER key to enter the data access mode, display the "MR" symbol, at the same time, automatically display the 01st group of data, and then press PEAK or POWER key can be up or down to cycle through. In checking mode, press PEAK + POWER to store all data and return to normal test mode. The "dEL" symbol is displayed during the data clearing process.
3. LCD Display
Under normal testing, the LCD displays the size of the measured current and leakage current during testing, and the LCD data changes with the size of the current and leakage current, when the instrument is withdrawn from the tested conductor, it does not keep the test results, and the display returns to zero.
4、Precautions
Can not be used to measure more than 600V line, leakage current, current test must keep the jaws fully closed. Wire as far as possible in the center of the jaws. After the completion of the test, pay attention to clean the clamp head, maintenance of the instrument.
