A few questions and answers about the coating thickness gauge?
1. Why can't I turn on my thickness gauge after I haven't used it for nearly a year?
Answer: When the user receives the newly purchased thickness gauge, he must first charge the instrument. Generally, it takes 8 hours to charge. If there is no charging and discharging for a long time, the battery of the instrument is easy to lock up, and the battery life will also be affected. If the new machine has not been used for 2 months, if it cannot be turned on, it may be that the battery is locked. You need to activate it according to the manual. If it still cannot be turned on, please do not open the machine by yourself, but return it to the maintenance station for repair.
2. How to recover after the battery is locked?
Answer: After the battery is locked, the user can operate by forced reset according to the corresponding model manual. When there are text or numbers displayed, charge immediately. If it still cannot be restored, please contact the maintenance station.
3. What should be paid attention to after restoring the factory settings?
Answer: After the instrument is forced to reset, basic calibration must be carried out. The calibration method can be operated according to the manual, or consult the sales and maintenance personnel of the era.
4. Why does the measured value of the workpiece still appear "inaccurate" after calibration on the calibration test piece attached to the machine?
Answer: There are many factors that affect the measured value, which are described in detail in the instruction manual. The properties of metal materials and surface roughness all have an impact on the measured value. The base material that comes with the machine is often very different from the metal base material on the user's site. Therefore, we recommend that the base material and test piece that are provided with the machine are only used for instrument calibration. The same material that has not been sprayed on site should be used as the base material when measuring the workpiece on site.
5. What is the reason for the error message starting with E?
Answer: The error prompt function is a unique function of the Times Coating Thickness Gauge, which is convenient for the user to describe the fault. Different error messages represent different faults. For example, E02 represents the wear of the probe. There are detailed table descriptions at the back of these manuals. You can refer to them.
