Analysis of Basic Knowledge About Combustible Gas Detectors
It should be noted that gas detection is receiving increasing attention from people in various aspects of our lives, and the results obtained during detection are also receiving considerable attention. You should know that this can have a significant impact on our personal health. Gas detector is an instrument for detecting gases, which mainly relies on sensors at the sensor port to sense toxic and harmful gases, thereby achieving the purpose of alarm. Most gas detectors are mainly used for monitoring in industries, environments, and other fields. Below, we will briefly understand the monitoring of gas detectors in industry.
The combustible gas detector is a gas concentration detection instrument that integrates a gas detector and a gas alarm controller. The gas detector can be directly powered by a 220V power supply. The toxic gas detector uses imported electrochemical/catalytic combustion sensors, which have the advantages of stable signal and high accuracy. The explosion-proof wiring method is suitable for various hazardous areas. Its product features: 1. Advanced microprocessor technology for combustible gas detectors; 2. Range specifications can be determined by users according to their actual requirements; 3. 220V AC power supply; 4. On site concentration display, sound and light alarm; 5. Fast response speed and high measurement accuracy; 6. The output signal can be determined by the user according to actual requirements; 7. Relay output (optional), RS485 bus output (optional).
In addition, for the detection principle of combustible gas detector, catalytic combustion/electrochemical detection method, diffusion working method, long-term continuous working output signal, relay output or RS485 output (optional), wiring method model RVVP3 1.0mm2 structural material die-casting aluminum explosion-proof mark Ex dIICT6 protection level IP65 working humidity 90% RH working temperature -20~50 ℃ (special requirements are determined according to needs). Combustible gas detectors are national mandatory calibration measuring instruments, widely used in industries such as metallurgy, petroleum, chemical, petrochemical, coal, as well as municipal gas, storage, transportation, hotels, restaurants, and fire departments.
When combustible or toxic gases leak in the environment and the gas concentration reaches the explosion or poisoning critical point set by the detector, the combustible gas detector will issue an alarm signal to remind the staff to take measures to prevent explosion, fire, and poisoning accidents, thereby ensuring production. Due to the sensitivity of the detector sensor naturally decreasing by 10% to 30% annually under normal use, if the sensitivity of the detector sensor decreases and the leaked gas concentration reaches the lower explosive limit without timely alarm, there will be a risk of explosion. Therefore, combustible gas detectors need to be calibrated regularly every year to ensure the accuracy and reliability of their performance and measurement values.
