Analysis of common failures of microscopes
1. When the microscope is used for a period of time, the image quality will be degraded. Shut down for a while.
Time and then turn on the image quality will be significantly better. Diagnosis: Lens Plating
The film technology is not good enough, and the coating diffuses conduction after the lens is heated for a long time.
To.
2. The image is clear when manually adjusting the focus, and the image is blurry after letting go. diagnosis
Broken: The focusing mechanism is aging.
3. The image is clear when the eyepiece is observed, but the collected image is not clear
clear. When the acquired image is adjusted to be clear, observe the image in the eyepiece
It's not clear again. Diagnosis: insufficient system parfocality, observation and acquisition
Unable to sync. Camera interface does not match.
4. The stage slides and moves. Diagnosis: Stage locking mechanism With the star gear, the long-term use stability is reduced.
5. The middle of the image is clear and the edges are blurred. Diagnosis: Incomplete correction of spherical aberrationgood.
