Analysis on the principle of magnetic eddy current dual-purpose coating thickness gauge
MC-3000F/N magnetic and non-magnetic dual-purpose coating thickness gauge, equipped with N\F probe, cleverly combines eddy current thickness gauge and magnetic coating thickness gauge. Users can choose ferromagnetic thickness probes or eddy current thickness probes to measure the coating thickness on magnetic or non-magnetic metals according to on-site needs. Greatly increases the application range of the instrument. This type of coating thickness gauge can conveniently and non-destructively measure the thickness of non-magnetic coatings on ferromagnetic materials, such as zinc, copper, chromium and other coatings on the surface of steel or coatings such as paint, enamel, fiberglass, plastic spray, asphalt and other coatings. thickness of. It can also conveniently and non-destructively measure the thickness of non-conductive coatings on non-magnetic metal substrates, such as paint, rubber, plastics, oxide films, etc. on copper, aluminum, zinc, tin and other metals. This instrument is widely used in machinery, automobiles, shipbuilding, petroleum, chemical industry, electroplating, plastic spraying, enamel, plastics and other industries. This model of coating thickness gauge uses automatic deviation tracking technology to make measurement values more accurate. The probe is processed using German process standards and uses new alloy materials to greatly improve the service life and accuracy of the probe.
MC-3000F/N magnetic and non-magnetic dual-purpose coating thickness gauge performance indicators:
Basic measurement modes: normal mode, minimum value mode, statistical mode.
Monitoring measurement mode: Difference setting and upper and lower limit alarm settings can be performed.
You can choose to delete a single stored data, a certain group of data or all data.
It can perform zero-point calibration, two-point calibration and system calibration.
You can set the shutdown mode, turn the backlight on or off, and restore to factory status.
You can print stored values and statistical values.
There are 6 groups of data stored in groups, and each group stores 99 measurement points.
Stored measurement values can be viewed in groups.
MC-3000F/N magnetic and non-magnetic dual-purpose coating thickness gauge technical parameters
Fe probe measuring range: 0~1200um
NF probe measurement range: 0~1200um
Maximum display accuracy: 0.1 um
Undervoltage display: The undervoltage indicator icon is displayed in the upper left corner
Display mode: 128*64 dot matrix LCD, graphic display
Size/weight: 146*81*30mm 260g
