Anemometer-wind speed sensor knowledge summary
I. Overview
The wind speed sensor adopts the three-cup design concept to effectively obtain external environmental information. The shell is made of high-quality aluminum alloy profiles, which have good anti-corrosion, anti-corrosion, good dynamic characteristics, good linearity, high precision, high sensitivity, and strong wind resistance. With the internal smooth bearing system, the accuracy of information collection is ensured. The rotation of the wind cup drives the inner jagged infrared fence to rotate, and then through the infrared effect, it becomes a pulse signal for collection, and the wind speed value is obtained through precision microchip calculation. Can be widely used in meteorology, ocean, environment, airports, ports, laboratories, industry and agriculture and transportation and other fields.
2. Application Notes
(1) Be sure to read this manual carefully before using the product to ensure that the wiring is correct before powering on;
(2) The instrument is a precision device, please do not disassemble it by yourself when using it to avoid damage to the product
(3) Remember not to plug and unplug the sensor with power, so as not to cause damage to the sensor;
(4) Please keep the verification certificate and certificate of conformity, and return it together with the product during maintenance
3. Practical application of wind speed sensor
The wind speed sensor is an on-site acquisition device used in meteorological stations (stations), chemical industry, power stations, industrial and mining enterprises, etc. to record the wind's journey and observe the instantaneous wind speed. Using it with the corresponding instrument can realize the digitalization and automation of the wind speed indication of the facility, and it is an indispensable modern facility for related facilities.
The wind cup of the wind speed sensor is made of high weather resistance and high strength engineering plastics, the sensor housing is made of ABS engineering plastics, and the upper and lower housings are sealed by rubber O-rings. The internal circuits are all sprayed with three anti-paints, and the entire sensor has good adaptability to harsh environments. The output of the wind speed sensor is a frequency signal. ,,
