Application problems of DC regulated power supply (switching machine and voltage regulation)
The DC regulated power supply is an electrical energy supply device that converts the AC voltage into a stable DC power output.
The use of DC regulated power supply:
1. Start:
①Turn the voltage adjustment knob to the minimum position (usually counterclockwise to decrease), and then turn the constant current knob to the minimum position.
②Connect the plug of the power cord of the DC regulated power supply to the AC socket, and turn on the switch of the DC regulated power supply.
pressure regulation;
③ Rotate the steady flow knob to adjust the steady flow value appropriately.
④Rotate the voltage regulator knob to adjust the voltage as required, and the voltage value should not be too large.
2. Shut down:
⑤ After the experiment is done, first turn all the voltage stabilizer and current stabilizer knobs to the minimum position, then turn off the voltage stabilizer power switch, and finally remove the wires used to connect the circuit.
