Basic Handling Methods for Gas Detector Failures
1. If it is a gas detection alarm instrument and the product cannot be turned on normally during use, please check if the battery is fully charged first. If the battery is not charged, please follow the instructions to charge the battery. If it is found during use that the instrument is not working properly and there is no problem with the battery, the principle is to test the gas, wait for 3-5 minutes, and wait for the instrument value to reply. If the problem cannot be solved, if possible, re calibrate the gas (or mail it to the Beijing headquarters of New Instruments Australia for calibration). If the problem still cannot be solved, please contact our customer service personnel to mail the Australian New Instrument Beijing headquarters for maintenance.
2. If it is an online detection instrument. Check if the circuit is unobstructed. Using observation to utilize vision, smell, and touch. Sometimes, damaged components may discolor, bubble, or show burnt spots; Burned components will produce some special odors; Short circuited chips will heat up; Virtual welding or detachment can also be observed with the naked eye. If the problem cannot be solved, please contact the customer service personnel of Australia New Instrument Beijing headquarters and mail it back to us for maintenance.
Portable gas detector:
This series of toxic, harmful gas and oxygen detection alarm devices use electrochemical sensors, while combustible gas detection alarm devices use catalytic combustion sensors. Replacing the sensor can detect dozens of toxic gases such as CO, H2S, O2, NH3, H2, C2H4, etc. Digital chip control, fully intelligent, simple touch button operation, large screen LCD display, ultra bright orange backlight for easy use in low light conditions, simultaneous sound, light, and vibration alarms, two power supply modes of dry battery and lithium rechargeable battery, battery undervoltage alarm, well sealed, small size, easy to carry.
