Benefits of Using an Infrared Thermometer
Convenient! Infrared thermometers provide quick temperature measurements, and in the time it takes to read one leaky junction with a thermocouple, nearly all junctions can be read with an infrared thermometer. In addition, because the infrared thermometer is solid. Lightweight. (All lighter than 10 ounces), and easy to put in the leather case when not in use. So you can carry it when you are doing factory inspections and daily inspections.
Accurate!
Another advanced feature of the infrared thermometer is its accuracy, usually within 1 degree. This capability is especially important when you are doing preventive maintenance, such as monitoring severe production conditions and special events that will cause equipment damage or downtime. Since most equipment and plants operate 365 days, downtime equates to lost revenue. Prevent such losses by scanning all field electronics - circuit breakers. transformers. fuses. switches. buses and switchboards for hot spots. With an infrared thermometer, you can quickly detect even small changes in operating temperature, allowing problems to be fixed in the bud, reducing the expense and scope of repairs due to equipment failure.
Safety!
Safety is the most important benefit of using an infrared thermometer. Unlike contact thermometers, infrared thermometers can safely read the temperature of inaccessible or inaccessible targets
, you can read the target temperature within the range allowed by the instrument. Non-contact temperature measurement can also be performed in unsafe or difficult-to-contact temperature areas, such as near steam valves or heating furnaces, where they do not need to risk burning their fingers when inadvertently contacting the temperature measurement. Accurate measurement of supply/return air temperatures up to 25 feet overhead is as easy as having it at hand.
