Calibration of infrared thermometers and temperature probes
First, in the black body radiation source, with more than two standard thermocouples, photoelectric pyrometer or accuracy level higher than the calibrated infrared thermometer infrared thermometer as a standard, tuning can be.
Second, all objects with temperatures higher than absolute zero are constantly emitting infrared radiation energy to the surrounding space. The size of the object's infrared radiation energy and its distribution by wavelength - and its surface temperature has a very close relationship.
Therefore, through the measurement of the infrared energy radiated by the object itself, it will be able to accurately determine its surface temperature, which is based on the objective basis of infrared radiation temperature measurement.
Infrared thermometer notes:
1, in order to avoid damage to the infrared thermometer, please first use compressed air to remove large particles and dust, and then wipe with a piece of cloth.
2, gently use slightly dampened with a non-corrosive solution labeled for cleaning the lens or a mild diluted soap solution (solution or a mild diluted soap solution (never use a dissolved soft cotton cloth to wipe the lens (do not immerse the cloth into the liquid) agent) of the soft cotton cloth to wipe the lens (do not immerse the cloth into the liquid). Use a clean computer monitor cleaning cloth to gently wipe the display.
3. Gently wipe the display with a clean computer monitor cleaning cloth.
4. Gently wipe the body of the thermometer with a clean, slightly damp cloth. If necessary, wet the cloth with a solution of water and a small amount of mild soap.
5, when finished using, please cover the infrared thermometer lens cover as soon as possible, and put it into the carrying case to save!
