Can a level ruler be used to measure angles
1、 Can a level ruler be used to measure angles
A horizontal ruler is a tool used to measure level, usually mainly used to measure levelness and levelness. Sometimes, during the T process, angle measurement is required, and a goniometer is needed,
So can a level stick measure angles?
Usually, an ordinary level ruler does not have the function of measuring angles and is only used for detecting or measuring levels and verticality; Of course, there are also horizontal rulers and the scale surface of the ruler body
There is a goniometer that can help measure angles. With the development of technology, electronic digital level gauges can also be used to measure angles, and their functions are very powerful. In addition to measuring levels, they can also measure inclination, absolute angle relative angle, inclination, and so on.
2、 How to measure angle with an electronic digital level gauge
Electronic digital display level is a relatively advanced level, which is easier to understand and has multiple functions compared to ordinary level. Measuring angle is one of them. Below, we will introduce the method of measuring angle with electronic level:
1. Absolute angle measurement
Press the "Power Switch" button to directly enter the absolute angle measurement state, and the LCD digital display screen will display the angle value between the measured surface and the horizontal plane. When there is a change in the accuracy between the working surface of the level and the horizontal plane, the degree value will also change accordingly. When the inclination direction prompt is displayed as "/", it indicates that the level bar is low on the left and high on the right, and the displayed angle value is a positive number; When it is displayed as ", it indicates that the level bar is high on the left and low on the right, and the displayed angle value is a negative number. When the measured angle exceeds the measurement range, the level bar will display an error prompt.
2. Relative angle measurement
Place the level ruler on the first measured surface, press the "Absolute/Relative" button, and the display will be 0.00. The relative angle measurement prompt "<" will appear at the top right of the LCD screen, and the level ruler will move towards the second measured surface. At this time, the displayed value on the LCD screen is the relative angle between the two measured surfaces. Press the "Absolute/Relative" button again, and it will be converted to absolute angle measurement.
