Common faults and solutions for moisture meters
The instrument cannot heat up or heats unevenly:
1. Check whether the power connection is normal and ensure that the power supply is stable.
2. Check whether the heating element is damaged or needs to be replaced, such as a halogen lamp.
3. Clean the heating chamber to make sure there is no dust or dirt affecting the heating effect.
The measurement results are inaccurate or have large deviations:
1. Check that the sample container is properly placed in the instrument and ensures good contact with the instrument.
2. Check whether the sample container is clean and dry to avoid external factors affecting the measurement results.
3. Check whether the instrument needs calibration and follow the instrument's calibration procedures.
The display cannot display or the display is unclear:
1. Check whether the power supply of the instrument is normal and ensure that the power supply is stable.
2. Check the display screen for impurities or dirt and need to clean it.
3. If the problem persists, you may need to contact the instrument manufacturer for further repair or replacement.
The instrument is noisy during operation:
1. Check the stability of the instrument and ensure that the instrument is placed on a stable surface.
2. Check whether the fan or other cooling system of the instrument is functioning normally and whether there is any blockage or failure.
The instrument displays an error code or alarm:
1. Refer to the instrument's operating manual to find the explanation and solution for the corresponding error code or alarm.
2. Check whether the sensor or probe of the instrument is normal, clean or replace the problematic parts.
For more serious or complex faults, it is recommended to promptly contact the instrument manufacturer or technical support team for further troubleshooting and repair. When operating the instrument, always follow safe operating procedures and perform proper operation and maintenance according to the instrument's operating manual.
