Common faults and solutions of halogen moisture meter
The instrument cannot be heated or the heating is uneven:
1. Check if the power connection is normal and ensure that the power supply is stable.
2. Check if the heating element is damaged or needs to be replaced, such as a halogen lamp.
3. Clean the heating chamber to ensure that there is no dust or dirt affecting the heating effect.
Inaccurate or significant deviation of measurement results:
1. Check if the sample container is properly placed in the instrument and ensure good contact with the instrument.
2. Check if the sample container is clean and dry to avoid external factors affecting the measurement results.
3. Check if the instrument needs calibration and follow the calibration procedure of the instrument.
The display screen cannot be displayed or is not clear:
1. Check if the power supply of the instrument is normal and ensure that the power supply is stable.
2. Check the display screen for impurities or dirt, and clean it.
If the problem persists, it may be necessary to contact the instrument manufacturer for further repair or replacement.
The operating noise of the instrument is high:
1. Check the stability of the instrument and ensure that it is placed on a stable surface.
2. Check if the fan or other cooling system of the instrument is functioning properly and if there are any blockages or malfunctions.
Instrument displays error codes or alarms:
1. Refer to the instrument's operating manual to find explanations and solutions for corresponding error codes or alarms.
2. Check whether the sensor or probe of the instrument is normal, clean or replace any problematic components.
For more serious or complex faults, it is recommended to promptly contact the instrument manufacturer or technical support team for further troubleshooting and repair. When operating the instrument, always follow safety operating procedures and carry out correct operation and maintenance according to the instrument's operating manual.
