Common Problems and Solutions of Stereomicroscope
1. The field of view is blurred or dirty, there may be dirt on the specimen, dirt on the surface of the eyepiece, dirt on the surface of the objective lens and dirt on the surface of the working plate. Depending on the situation, clean the specimen, eyepiece, objective lens and work plate surface dirt.
2, the double image does not coincide with the reason may be the pupil distance adjustment is not correct. The pupil distance can be corrected. Double image does not coincide may also be incorrect vision adjustment can be re-vision adjustment, there may be different magnification of the left and right eyepieces can check the eyepieces and re-install the same magnification eyepieces.
3, if the image is not clear may be the objective lens surface has dirt, please clean the objective lens.
4,If the image is not clear when zooming, it may be that the view is not correctly adjusted and the focus is not correct, you can re-adjust the view and focus.
5, if the bulb often burns out and the light flickers, it may be the local line voltage is too high, the bulb is burnt out and the wire connection, please carefully check the voltage and the microscope wire connection is firm, if not, it may be the bulb is burnt out can be replaced again.
