Common problems with the use of trace moisture analyzer
Firstly, in the process of using a trace moisture analyzer, the color of this product is a color between brown and dark yellow. The main reason for this situation is that the color of the electrolyte is relatively dark during the moisture measurement process, and the electrode generally does not have a particularly serious impact on the product, so this situation occurs. After this situation occurs, it can also be handled. Firstly, during the processing, some paper towels can be used as they have a certain adsorption capacity, which can effectively avoid the occurrence of some faults during the testing process.
Secondly, the drift of the fresh anode electrolyte in the reservation is too high, and the main reason for the occurrence of this situation in the trace moisture analyzer is that there is a lot of residual water inside, which leads to overheating. Solution: There are generally two ways to use this situation, the first is to directly expose it to the sun. The second way is to change the pipes.
In addition, if the titration time is relatively long during the use of a trace moisture analyzer, the main reason for this situation is improper parameter control. Solution: The commonly used method in the process of solving is to terminate and increase the endpoint. If this method does not work during use, you can try it with a replacement battery. This is also a good treatment method, so you can also try it.
