Details of the use of electric soldering iron tip
Usually pay attention to the maintenance of the electric iron head mainly because:
(1) If the dirty electric iron tip is not cleaned and re-tinned in time, it will cause false welding or
Welding quality problems such as large solder joint burrs.
(2) Because the tip of the electric soldering iron is dirty and not easy to weld, it is bound to prolong the welding time and lengthen the welding time.
The high temperature over time will cause damage to components such as copper foil and transistors on the circuit board.
(3) The internal heat transfer effect of the dirty electric soldering iron head is very neat, the heat generation is small, and there is
Sometimes it is not even possible to melt tin.
(4) After being seriously dirty, the fixing screws of the electric soldering iron head will rust to death, making the soldering iron head
The iron head cannot be replaced with a new one, causing permanent damage.
In normal use. If it is not necessary, try not to let the electric soldering iron "dry burn" for a long time when it is powered on. When not in use, you should unplug it in time or place it on a low temperature file. During use. If the tip of the soldering iron is found to be slightly dirty, dip it in rosin and tin in time to keep the tip of the soldering iron clean.
The soldering iron head can be disassembled and assembled at least once every month, and the soldering iron head and the inside should be cleaned.
Remove the shelled booties from the inside to prevent the fixing screws from rusting.
