DR120 Integrated Coating Thickness Gauge Technical Description

Jan 26, 2023

The DR120 coating thickness gauge adopts the principle of electromagnetic induction, and according to the national industry: GB/T 4956-1985 standard, it can quickly, without damage, and accurately measure the thickness of the magnetic metal surface coating. It can non-destructively measure the thickness of non-magnetic coatings (such as: paint, electrophoresis, enamel, rubber, powder, enamel, anti-corrosion layer, galvanized, chrome, etc.) on magnetic metal substrates (such as: steel, iron, nickel); DR120 The integrated coating thickness gauge is exquisite and compact, and uses a metal measuring head to make the on-site test more stable and firmer.

This instrument can be widely used in the detection fields of automobile paint, automobile evaluation, manufacturing, metal processing, chemical industry, commodity inspection and so on.

DR120 Coating Thickness Gauge Instrument Features

A. Exquisite integral design, easy to carry

B. Metal probe, strong, wear-resistant, more stable

C. Ergonomic design, comfortable operation, can be placed on a smooth and flat surface

D. The test speed is fast and the reading is accurate

E. There are two measurement methods: continuous test and single measurement; continuous test reduces human error and makes the measured value more accurate

F. Four statistical functions: maximum value, minimum value, average value, measurement times, press the TA key to view

G. Two calibration methods: zero point calibration and two point calibration

H. There is a buzzer prompt during the operation (single measurement mode)

I. Automatic identification of iron-based and non-ferrous-based substrates

J. Low voltage indication

K. Manual/automatic shutdown function

DR120 Coating Thickness Gauge Technical Parameters

A. Measuring range: 0-1250μm

B. Degree: ±(1%-3%)H+1.5μm

C. Resolution: 0.1μm/1μm (0.1μm below 100μm, 1μm above 100μm)

D. The thinnest substrate: 0.4mm

E, minimum curvature convex 5mm; concave 25mm