A hot air repair station specifically created for soldering and desoldering surface mount components from PCB boards, such as QFP, BGA, and CSP, is the WHA3000P multifunctional hot air desoldering station. It is possible to successfully finish the soldering and desoldering work under situations that include lead-free soldering, multi-layer boards, and other working conditions that demand a lot of heat. The reflow curve of components may be mimicked, and soldering and desoldering work can be effectively finished without harming the PCB board and components, especially when hot air maintenance station and large-area, high-power infrared preheating board are combined. comparable to a basic BGA rework station.
Product benefits:
• LCD display, which makes it easier to adjust and track different parameters.
• To increase work efficiency, the idle function can pre-heat the nozzle and other parts.
The hot air head can be replaced using a specialized nozzle replacement tool.
• A vacuum suction pen with an integrated vacuum may automatically remove components after desoldering.
• The metal fence on the heat gun is built-in, and there is no charge on the hot air.
• Internal turbo pump; no external air supply necessary.
• A PC can be used to control an external preheating board that is attached.
• Ten groups of temperature-time curves can be stored by the equipment.
• To provide semi-closed loop control and prevent damage to delicate components, an external temperature sensor can be connected.
• It may function in accordance with a three-stage temperature-time curve when combined with WHP3000.
• Automatic or manual operation are the two operating modes. The 3-segment temperature-time curve of components can be easily configured, and there is no automatic instruction mode.
• ESD security
