Fluke Introduces 233 Remote Display Multimeter
Fluke has launched the Fluke 233, an innovative wireless display digital multimeter. Its launch marks Fluke's successful combination of wireless communication technology and multimeter electrical measurement technology, enabling remote wireless measurement and readings to become a reality, setting a new benchmark for the development of the next generation of digital multimeters.
A New Generation of Digital Multimeters for Wireless Communications 233
Fluke 233 uses the mature low-power 2.4 GHz ISM band wireless communication mechanism to achieve stable and reliable wireless data transmission between the multimeter host and the detachable display module, thus breaking through the limitations of traditional multimeters in reading and measurement space and The limitation allows users to "separate" the measurement work and reading work, which greatly improves the flexibility of measurement and reading, and also allows users to stay away from potentially dangerous or inaccessible measurement targets, making work safer and more efficient. .
The stable and reliable wireless data transmission of Fluke 233 is reflected in the one-to-one encrypted timely dialogue mechanism between the multimeter host and the separate display module. When there is no measurement data transmission, they can still keep in touch. In addition, the signal strength display on the separate display module also intuitively reminds the user whether the effective communication distance is exceeded. The detachable display also has built-in magnets that can be attached to a flat surface for easier reading.
In addition to the innovative wireless communication technology and detachable display design, the Fluke 233 itself is also a full-featured and accurate multimeter. The Fluke 233 and its accompanying test leads are CAT IV 600V/CAT III 1000 V safety grades, and the maximum voltage measured For AC and DC 1000 V, the maximum current measured is 10A. Measure capacitance to 10,000 μF, measure frequency up to 50 kHz, and automatically capture min/max and average readings. It supports 6,000-digit readings and has a built-in contact thermometer, allowing users to easily obtain temperature readings without having to carry an additional meter. The meter body is powered by three AA batteries; the display is equipped with two AA batteries. The average battery life is 400 hours.
"233 Apps Search" Chinese User Themed Activity
From now on, in order to allow Chinese users to share more possible use cases and applications of 233, Fluke Corporation will launch a prize-winning essay activity for Chinese users on "Renovated Fluke 233, 233 Applications Search" - no need to purchase, Just spark your imagination, email us back with your vision, and get involved to win a free F-233 from Fluke, along with other purchase terms.
Also introduced with the 233 is the Fluke 59 Infrared Spot Pyrometer. Measurement range of this product – 18°C to 275°C; Accuracy: ±2%/±2°C of reading; Optical Resolution: 8:1 (90% energy level); Repeatability: ±1%/±1 of reading ℃; LCD backlight, laser aiming
The standard configuration of Fluke 59 is a 59-point thermometer, a 9V battery, and a user manual.
The other two products:
18B new digital multimeter:
The innovative test light-emitting diode (LED) function of Fluke 18B realizes the measurement of 2-6V 2-pin LED through two modes (jack detection mode and test pen test mode). And only need to insert or measure once, you can judge whether the LED is good or bad, and at the same time prompt the position of the positive and negative pins. The test pen mode can also measure the forward voltage Vf of the LED while measuring the LED. At the same time, the 18B has upgraded the safety to CAT III 600V, extended the product warranty period to 2 years, and adopted the more durable and more pressure-resistant TL19B test pen to better meet the needs of Chinese customers.
28II: Dust-proof, waterproof, drop-proof industrial multimeter
The 28 II DMM sets a new standard for making measurements in difficult situations with superior functionality and accuracy to easily resolve most electrical faults. This multimeter is IP 67 (water and dust resistant) rated, under MSHA approval, and has an extended operating temperature range: -15 °C to +55 °C (5 °F to 131 °F, 20 minutes at -40 °C), 95 % humidity, tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series multimeters can work in the most demanding environments.
