Hot-bulb anemometer main uses and working process
The hot ball anemometer uses the basic principle of rapid heating to accurately measure wind speed. The sensitive component for accurately measuring wind force is a spherical component with a diameter of 0.8mm. It is a handheld, intelligent system, intelligent low wind precise measurement basic instrument that can accurately measure wind speed, exhaust volume, temperature, and environmental humidity as an integrated multifunctional instrument.
The main uses of a hot ball anemometer are:
The intelligent hot ball anemometer relies on precise measurement of wind speed as its basic element, which enhances the measurement of exhaust volume, air pressure, temperature, and air humidity through a series of instrument panels. It is a handheld instrument panel with intelligent systems and precise measurement of low wind speeds. It has universal main uses in various aspects such as central heating, natural ventilation, air conditioning systems, ecological environment protection, environmental protection and energy conservation testing, climate, agriculture and animal husbandry, refrigeration, dryness, and occupational safety and health research.
The working process of a hot ball anemometer:
Place the measuring rod vertically upwards in the natural environment being measured. That is done to reduce the zero compensation deviation caused by the temperature difference between the measurement point and the working temperature, and to ensure the camera's sealing by tightening the oil plug. Press the 'On' button to start, and the meter will enter the heating state and automatically carry out wind power return to zero compensation, which takes about 30 seconds. After the compensation for heating and wind return to zero is completed, this table will check whether the copier is connected; When accurately measuring wind force, the measuring rod should be pulled out so that the measured wind corresponds to the dialog box of the sensitive component, and the small red dot should face the incoming wind. When accurately measuring wind power using the instant measurement and display method, the display information window will immediately track the change of the measured wind power and check the working voltage of the rechargeable battery. If the working voltage of the rechargeable battery is not enough, the message prompt LOW will be displayed, prompting the customer to replace the battery immediately or apply an external power source.
