1. The gear setting method of the wood moisture tester: first press the gear setting key (SP E CIES), then press the test key (TEST), at this time the screen displays the current gear value, such as pressing continuously to set key to continuously change the gear until the required gear.
2. Determination: Insert the probe on the wood moisture tester into the wood sample to be measured. Then press the test button, and the value displayed by the wood moisture tester is the average moisture content of the sample. If the measured sample moisture is less than 3%, the display will display 3.0, and if the measured sample moisture is greater than 40, the display will display 40, indicating that the range has been exceeded.
3. Check before measurement: set to 5th gear according to the above method, then remove the cap of the wood moisture tester, touch the two probes on the instrument to the two contacts on the cap, and then press the test button, if the display If it is 18±1, it means that the instrument is normal.
