How to clean the electric soldering iron tip
Manual cleaning of soldering iron tips
1. When cleaning the soldering iron head, if the sponge uses too much water, the temperature of the soldering iron will rapidly drop, making it difficult for the tin residue to fall off. If the water is insufficient, the sponge will be burned off. The principle of cleaning: When there is an appropriate amount of water, the water will boil and fluctuate when the soldering iron head comes into contact, achieving the purpose of cleaning.
2. The soldering iron tip must have a uniform amount of remaining tin, which will bear some of the heat and ensure that the soldering iron tip is not oxidized by air, which is beneficial for extending the lifespan of the soldering iron. When turning off the power without leaving any remaining tin, the temperature gradually decreases and thermal oxidation occurs, reducing the lifespan of the soldering iron
Using a soldering iron tip cleaner
1. Cleaning the soldering iron tip is simple and convenient. Many cleaners have anti-static functions (do not come with grounding wire, 0 silent design saves energy, only 5W consumes power (equipped with AC adapter)
2. To prevent solder splashing, the inner sealed design can prevent solder splashing everywhere when cleaning the soldering iron head, effectively reducing the production scrap rate; All cleaning actions are internally sealed to prevent solder spatter.
3. Reduce the temperature drop of the soldering iron head. The cleaning brush does not need to be used with water. During cleaning, it can reduce the temperature drop of the soldering tip and maintain high working efficiency of the soldering iron head.
Cleaning a soldering iron head is a simple but difficult task to adhere to, which requires developing good habits. Only in this way can our soldering iron heads be better used and have a longer lifespan!
