How to prevent soldering iron soldering wires from being toxic:
First of all PCB factories in the soldering iron soldering components to use ROHS tin wire, and to do a good job of prevention: such as with gloves, masks or gas masks, the workplace attention to ventilation, exhaust system is good, pay attention to cleaning after the work, drink milk is also a way to prevent lead toxicity in the solder.
1, to rest a break time General repair 1 hour to rest about 15 minutes to relieve fatigue because fatigue resistance is the worst.
2, less smoking, drink more water so that during the day can eliminate most of the harmful substances absorbed.
3, drink green bean soup or honey water before going to bed so that you can lower the fire on the mood to help and green beans and honey can eliminate the absorption of a lot of lead and radiation!
4, can avoid radiation as much as possible to avoid more use of the phone phone less mobile phone out of the house when no way to use the phone.
5, can make the soldering iron a little brighter try to use PPD soldering head so that the temperature reached can be less use of soldering oil and rosin to reduce the harm to the body, and the body of the soldering iron can be used to avoid the use of soldering oil and rosin to reduce the harm to the body.
6, soldering oil soldering smoke when trying to head to the side of the point when brushing the water to the side of the point when the head to try to hold your breath.
7, less use of water, more use of alcohol, with alcohol more brush for a while the effect is almost the same.
8, to wash your hands.
9, before going to bed, take a bath, try to go to bed early and get up early to ensure adequate sleep, as long as you sleep well, the impurities can be basically discharged with the body.
10, with a mask work.
