How to replace the sensor of the combustible gas detector?
The combustible gas detector is used for leak detection of various combustible gases, such as methane, propane, hydrogen (ie, natural gas, liquefied gas, artificial gas), etc. The combustible gas detector has a high sensitivity and a wide range of applications. It can accurately detect some commonly used combustible gases such as carbon monoxide gas and natural gas. The instrument is small in size, easy to carry, and has a built-in Chinese menu. .
ToxiRAE Combustible Gas Detector
Combustible gas detectors and other gas detectors have the same detection principle for gas, and combustible gas detectors all rely on gas sensors to work. After a period of use, the combustible gas detector will have some problems. Maybe due to the long-term use, the sensitivity of the gas detector will decrease, so the sensor needs to be replaced after a period of use.
Some users think that the sensor needs to be replaced after using the detector once, but it is not necessary. On the contrary, it will damage the original component configuration and make the gas detector less sensitive. After each detection, the sensor will display the retained value. When the value display becomes smaller, it should be replaced. Therefore, users should pay attention to the retained value of the sensor at any time, which is a very important judgment indicator. When you use a gas detector, if you can't ensure the normal performance of its functions, you can't measure it accurately. In fact, it is necessary to ensure the normal functioning of each component in order to make the gas detector work normally. Among them, the sensor of the gas detector is very important and needs to be replaced in time. If the sensor does not have enough sensitivity to sense, it is necessary to replace it to achieve accurate measurement, and the sensor can be used normally.
In the actual situation, whether the customer needs to replace the sensor of the combustible gas detector or not, there is a bottom line for everyone to determine, no matter which method is used to determine, it is necessary to ensure that the gas detector can work normally .
