There are many types of level, laser level is one of them, laser level, also known as infrared level, laser level, is a level that relies on emitting a beam of laser to measure whether it is level or not. Using a laser level is not difficult:
1. Put the laser level on the datum plane or tripod, and turn on the switch.
2. The laser level will emit two red lasers, one horizontal and one vertical. By adjusting the position of the lamp socket, different line types can be produced, so that the vertical laser line falls in the required position.
3. After the bubbles on the laser level are completely still, look at the position of the level bubbles. Which side the level bubbles deviate from, it means that the side is higher, that is, the height of the side needs to be lowered, or the height of the opposite side needs to be increased. Adjust the bubble to the center.
4. After the operation is completed, turn off the switch, carefully place the laser level, and wait for the next use.
