Influence of micro-moisture tester determinants
The micro moisture tester is already familiar to everyone, but I don't know that the fog has a major impact on its use.
Fog is an aerosol system consisting of a large number of tiny water droplets or ice crystals suspended in the air near the ground. The presence of fog will reduce air transparency, so that visibility deterioration, if the horizontal visibility of the trace moisture meter is reduced to less than 1,000 metres, suspended in the near-surface air in the water vapour condensate weather phenomenon known as fog; and trace moisture meter horizontal visibility in the 1,000-10,000 metres of this phenomenon is known as light fog or mist. Formation of fog when the atmospheric humidity should be saturated.
In terms of its trace moisture meter, fog and clouds are the product of water vapour condensation in the air, the general thickness of the fog is relatively small, common trace moisture meter thickness of about tens of metres to one to two hundred metres or so. Fog and clouds, as well as the clear sky area with a clear boundary between the concentration of fog droplets is not uniform distribution, and the scale of the fog droplets is relatively large, from a few microns to 100 microns, the average diameter of about 10-20 microns or so.
