Infrared thermometer appears er1 how to do
1, infrared thermometer output error: if the replacement of the online infrared thermometer in the online infrared thermometer, may be the choice of a new infrared thermometer linear range of change with the original inconsistency, resulting in the sensitivity of the error, usually change the infrared thermometer needs to be recalibrated. Of course, online infrared thermometer output error, there may also be infrared thermometer factory not calibrated, then re-calibrated on the good.
2, infrared thermometer output signal is not stable: this reason is the temperature source itself, many temperature source itself is generally not a constant temperature, if there are conditions can be observed in the room at room temperature under important conditions, and other instruments to monitor the infrared thermometer output signal is stable. If only the instrument display is not stable, that is, the display instrument is not strong anti-interference capability.
Infrared thermometer precautions:
1, in order to avoid damage to the infrared thermometer, please first use compressed air to remove large particles and dust, and then wipe with a piece of cloth.
2, gently use a slightly dampened marked for cleaning the lens of a non-corrosive solution or a mild diluted soap solution (solution or a mild diluted soap solution (never use a dissolved soft cotton cloth to wipe the lens (do not immerse the cloth into the liquid) agent) of a soft cotton cloth to wipe the lens (do not immerse the cloth into the liquid). Use a clean computer monitor cleaning cloth to gently wipe the display.
3. Gently wipe the display with a clean computer monitor cleaning cloth.
4. Gently wipe the body of the thermometer with a clean, slightly damp cloth. If necessary, wet the cloth with a solution of water and a small amount of mild soap.
5, when finished using, please cover the infrared thermometer lens cover as soon as possible, and put it into the carrying case to save!
