Introduce the specific application of laser range finder in architectural decoration design
In daily life, interior designers and architects often encounter problems in the design and decoration process, causing headaches because of various measurement difficulties or safety hazards that cannot be found near the measurement site.
Today, laser rangefinders can solve similar problems for you and can easily measure the location or length of objects that cannot be approached.
Handheld laser rangefinders, such as stairwells, elevators and other areas that do not directly contact the measurement target, can help you replace the traditional box-shaped rule for measurement, saving manpower.
Laser rangefinder is a new type of high-performance handheld rangefinder introduced in recent years. With a patented design, it can measure distances from 0.0505 to 200 mm. The measurement accuracy is 1±1.5mm. Fast measurement, easy to use and compact design. Carry.
With this laser rangefinder, you don't need a lift table or telescopic ladder to measure the volume between houses or stairs, it only takes a few seconds to take a reading.
There is a safety hazard in conventional measurement that cannot be close to the measurement location. The laser has a red laser point, which gives you a clear idea of the location of the measurement point and requires only one person to operate it without other tools (such as a ladder). Even in hard-to-reach places, full measurements can be made to prevent maximum injury accidents.
In addition, in addition to the pocket-sized portable design, the rangefinder also has a length addition and subtraction function, which does not need to lie on the ground because it measures the ceiling.
The large LCD backlit display and laser rangefinder make it easy to read measurements while aiming down your target. Using a laser rangefinder, people can get to work twice as fast as with traditional methods. Measure distances, areas, volumes, trigonometric locations, Pythagorean theorem, and more.
It can be widely used in the following fields:
1. Construction industry: building distance measurement, house acceptance, pouring area, volume and other calculations.
Indoor industry: no area, door, window, bracket dimension measurement.
3. Measurement industry: Various distances or distances that cannot be measured directly.
4. Electromechanical industry: telecommunication equipment installation, equipment distance measurement construction, durability measurement, distance measurement that cannot be directly measured.
5. The public security system measures the accident handling distance.
