Introduction of Milliohm Multimeter METRAHIT IM XTRA

Dec 22, 2022

Leave a message

Introduction of Milliohm Multimeter METRAHIT IM XTRA


The revolutionary milliohm multimeter METRAHIT IM XTRA is the world's first multimeter equipped with a fast-charging battery. A handheld multimeter meets all the needs of electrical equipment testing and integrates multiple functions. It is not just a multimeter, it is also an insulation meter. , micro-ohmmeter, recorder, true RMS multimeter, coil short circuit tester!


Features


01. Up to 3.1GΩ insulation resistance test function, with interference voltage detection, output voltage: 50, 100, 250, 500 and 1000V according to DIN EN 61557-2 / VDE 0413-2


02. DAR: Dielectric Absorption Ratio, PI: Polarization Index


03. 4-wire milliohm measurement (Kelvin connection), 200mA or 1A measurement current, can accurately measure very small resistance with a resolution of 1μΩ


04. According to DIN EN 61557-4 / VDE 0413-4, 2-wire Rlo measurement, 200 mA test current


05. Short coil test with 1000 V and optional COIL adapter


06. Multifunctional measuring instruments (V, A, Ω, F, Hz, %, RPM, °C/°F)


07. True RMS AC/AC+DC current/voltage measurement up to 10/100 kHz bandwidth


08. A low-pass filter can be activated for 1 kHz (-3 dB) in the VAC/AC+DC range


09. DC measurement, 10 nA to 1A.


10. Use a current sensor for current measurement - 1:1 to 1:1000 variable ratio is adjustable, and the current value after the variable ratio is directly displayed on the panel


11. Capacitance measurement


12. Accurate temperature measurement - with RTD and TC-K temperature sensor, display °C and °F


13. Diode measurement (Ik= 1 mA, U flow up to 5.1 V) and continuity test


14. Overrun sound alarm


15. Obtain minimum/maximum value, DATA hold function


16. The memory module and synchronous clock can make the multimeter used as a recorder, and separate measurement storage


17. Push/Print function transmits the measured value to the software through the button


18. Sequence programming can be carried out for different test procedures


19. Color graphic display


20. Removing the backplane power supply: standard quick-change rechargeable lithium battery, optional WPC module for wireless charging, backplane battery with USB port, due to the touch protection module socket, can be used without interrupting the measurement circuit to replace


21. It is used for the automatic blocking protection ABS function of the current input port, which can prevent misoperation from burning the meter


22. The test pen has a test button with START (ISO) and STORE keys, which is easy to operate


23. The shell adopts IP52 protection, dustproof and splashproof, and the rubber holster can be replaced


24. Interface: The host integrates Bluetooth or WLAN, and the battery on the back panel has a USB interface for easy charging


25. IZYTRONIQ windows software for preparing test reports and graphic evaluation of measurements


3. Multimter silicon case -

Send Inquiry