Introduction to calibration steps of infrared thermometer
1. For the blackbody radiation source, use a second-class or above standard thermocouple, photoelectric pyrometer or infrared thermometer with a higher accuracy level than the infrared thermometer being calibrated as the standard, and then adjust it.
2. All objects with a temperature higher than absolute zero are constantly emitting infrared radiation energy into the surrounding space. The amount of infrared radiation energy of an object and its distribution by wavelength are closely related to its surface temperature.
Therefore, by measuring the infrared energy radiated by the object itself, its surface temperature can be accurately measured. This is the objective basis on which infrared radiation temperature measurement is based.
Infrared thermometer precautions:
1. To avoid damaging the infrared thermometer, please first use compressed air to remove large particles and dust, and then wipe it with a piece of cloth.
2. Gently use a slightly moistened non-corrosive solution or a mild diluted soap solution (solute or a mild diluted soap solution) labeled for cleaning the lens (never use a dissolved soft cotton cloth to wipe the lens (do not immerse the cloth in the liquid) Wipe the lens with a soft cotton cloth (do not immerse the cloth in liquid). Use a clean computer monitor cleaning cloth to gently wipe the display.
3. Use a clean computer monitor cleaning cloth to gently wipe the display screen.
4. Use a clean and slightly damp cloth to gently wipe the thermometer body. If necessary, dampen the cloth with a solution of water and a small amount of mild soap.
5. After use, please put the lens cover on the infrared thermometer as soon as possible and put it in the carrying case for storage.
