How to maintain the sensitivity of carbon monoxide gas detector tests
The carbon monoxide gas detector can effectively detect the gas concentration and prevent the gas concentration from exceeding the standard after gas leakage. The carbon monoxide detector detects the concentration of carbon monoxide gas in the air and converts it into an electrical signal through a carbon monoxide gas sensor. The magnitude of the electrical signal is related to the concentration of carbon monoxide.
The carbon monoxide detector is a precision industrial electronic instrument. During its use, it is easily affected by the external environment, resulting in inaccurate detection data and shortening the service life of the detector. Therefore, in the daily use process, we must pay attention to the maintenance and maintenance of the detector to maintain the detection sensitivity of its sensor.
1. Installation
When installing a carbon monoxide detector, pay attention to keeping away from places with more oil smoke and dust.
2. Dust removal
The carbon monoxide detector has been used for a long time, and a lot of dust will accumulate on its surface, which will seriously affect the detection sensitivity of the carbon monoxide detector. Therefore, the carbon monoxide detector should be dusted regularly to keep the instrument clean.
3. Moisture-proof
The damp environment also affects the sensitivity of the carbon monoxide detector, and even causes the instrument to fail in detection. Therefore, you should always check whether there are water droplets in the instrument and dry it in time.
4. Cleaning
When cleaning the carbon monoxide detector, avoid using detergents or solvents to wipe the instrument, which will damage the internal components of the carbon monoxide detector and cause certain chemical reactions in the material of the detector.
5. Check
Maintenance personnel should regularly check whether the carbon monoxide detector is in normal working condition, so as not to know if the alarm fails.
