Introduction to the use of laser rangefinder
1 Touch the Start/Measure key to turn on the rangefinder.
2. Use the plus or minus key to change the measurement reference edge as needed (only valid for a single measurement), A—leading edge; B—instrument support; C—trailing edge.
3 Aim at the target with the laser, touch the start/measure button again, and record the measurement value.
4 After the measurement is completed, press the clear key until the initial screen appears. Press the plus and minus keys at the same time to turn off the rangefinder.
5. When there is no work order for 90 seconds, the rangefinder will automatically shut down.
6. The rangefinder can be self-calibrated by using the standard distance, and can be corrected through the Offset menu item.
