Metallographic microscopes should have three protection conditions
Metallographic microscope is a high-tech product developed by combining optical microscope technology, photoelectric conversion technology, and computer image processing technology. It can easily observe metallographic images on a computer, analyze and grade metallographic maps, and output and print images. To extend the lifespan of a metallographic microscope, the following points need to be noted during use:
Firstly, if conditions permit, it is recommended that your laboratory should have three protective conditions: shockproof, moisture-proof, and dustproof; Power supply: 220V ± 10%, 50HZ; Temperature: 0 ° C-40 ° C. When focusing, be careful not to let the objective lens touch the sample to avoid scratching the objective lens. When shutting down and not in use, do not immediately cover the dust cover. Wait until it cools down before covering, and pay attention to fire prevention.
Secondly, the brightness adjustment should not be too high or too low, as it may affect the lifespan of the light bulb and also damage vision. All (functions) should be switched, and the action should be light,
Metallographic microscope is a high-tech product developed by combining optical microscope technology, photoelectric conversion technology, and computer image processing technology. It can easily observe metallographic images on a computer, analyze and grade metallographic maps, and output and print images.
To extend the lifespan of a metallographic microscope, the following points need to be noted during use:
Firstly, if conditions permit, it is recommended that your laboratory should have three protective conditions: shockproof, moisture-proof, and dustproof; Power supply: 220V ± 10%, 50HZ; Temperature: 0 ° C-40 ° C. When focusing, be careful not to let the objective lens touch the sample to avoid scratching the objective lens. When shutting down and not in use, do not immediately cover the dust cover. Wait until it cools down before covering, and pay attention to fire prevention.
Secondly, the brightness adjustment should not be too high or too low, as it may affect the lifespan of the light bulb and also damage vision. All (function) switches should be light and in place. When turning off, turn the brightness to the minimum. When turned off and not in use, adjust the objective lens to the lowest state through the focusing mechanism. Non professionals should not adjust the lighting system to avoid affecting the imaging quality.
Thirdly, do not switch the objective lens when the center of the circular hole on the stage gasket is far from the center position of the objective lens to avoid scratching the objective lens. When replacing halogen lamps, pay attention to high temperatures to avoid burns; Be careful not to directly touch the glass body of the halogen lamp with your hands.
Be in place. When turning off, turn the brightness to the minimum. When turned off and not in use, adjust the objective lens to a low state through the focusing mechanism. Non professionals should not adjust the lighting system to avoid affecting the imaging quality.
Do not switch the objective lens when the center of the circular hole on the stage gasket is far from the center position of the objective lens to avoid scratching the objective lens. When replacing halogen lamps, pay attention to high temperatures to avoid burns; Be careful not to directly touch the glass body of the halogen lamp with your hands.
