Moisture meter plays a key role in grain quality inspection
Moisture is an important indicator in grain quality inspection, and it is of great significance to grain purchase, production, storage, transportation and other work. The standard method for grain moisture detection in my country is the drying weight loss method. Although it can accurately detect the grain moisture value, it is slow and has low work efficiency. Quick check. Nowadays, there are moisture meters on the market, and grain workers can use these instruments for quick testing.
It is understood that these moisture meters adopt a menu-guided operating system, which is very simple to use and easy to use. The first step is to press the power switch, the instrument starts self-inspection, and the variety code is displayed after passing. According to the variety code comparison table in the instruction manual, select the variety code. Put the tested product into the dropping barrel to the lower edge of the funnel. Put the blanking tube on the instrument sensor, hold the blanking tube with one hand, and lightly press the material door switch with the other hand, so that all the samples fall into the measuring sensor evenly, without pressing any keys, the instrument will automatically start measuring, and the decimal point will flash Moisture value is displayed after several times of movement. Close the material door of the discharge cylinder, pour out the sample in the sensor, and prepare for the next measurement.
In addition, the moisture meter has a built-in balance, which has functions such as volume conversion display, sample weight display, temperature display, and moisture average calculation. With a USB interface for easy download of calibration data. It can be used for the detection of grains with moisture content in the range of 5-45%, no need to prepare samples, fast and convenient.
