Ordinary electric soldering iron use options
If the component pins are large and thick, you can prepare another 50W one.
If soldering ordinary electronic components, I think it is better to use a 25w or 30w electric soldering iron.
, since it is welding P4 and the like, you can directly buy a 25W or 30W tip. It is enough to buy it at a hardware store for only 10 yuan. It is cost-effective.
How much power does the electric soldering iron need to solder some TV sets, stereos, and power amplifiers?
These circuit boards are all single-sided boards. If you use them frequently, you can buy a constant temperature soldering iron if you want to buy a better one. It usually costs tens of dollars. If you don’t use them often, don’t use too high a temperature for soldering single-sided boards. Buy a 40W Up to 50W is fine, that is seven or eight yuan
What is the difference between electric ferrochrome for repairing mobile phones and electric ferrochrome for repairing electrical appliances? Is it okay to use electric chrome iron for repairing electrical appliances to repair mobile phones?
The soldering irons for repairing mobile phones are all pointed, as if the iron wire has been sharpened, while the tip of the soldering iron for repairing electrical appliances is horseshoe-shaped. And the soldering iron for repairing mobile phones is more precise, and it is also better in terms of temperature control.
What I want to repair is the circuit board of the stereo. If the working rate is small, the temperature rise is too slow, and it is not cost-effective to use it too much. Please recommend it to friends who know it. Note: The tin block is used instead of the tin wire
It is recommended that you use 35W. The tin block can be cut with pliers, supplemented with auxiliary solder such as rosin.
What power electric soldering iron is suitable for welding electrical components such as diodes? ?
It is more appropriate to buy a 35W electric soldering iron.
What is the power of the electric soldering iron used to solder the battery head with tin? What shape of the soldering iron head?
Minimum 50W. Knife head
