Precautions for post-maintenance of hydrogen detector
1. The hydrogen gas detector has been calibrated before leaving the factory. Please do not replace the components at will after installation. If it needs to be replaced, it must be re-calibrated.
2. The normal service life of the hydrogen detector is 3 years. Due to the different use environment, its service life may be reduced, and regular inspection and maintenance should be carried out every year.
3. High-concentration hydrogen impact is prohibited on the part of the hydrogen detector, so as not to cause poisoning of the gas sensor and damage the detector.
4. During use, it is necessary to regularly check whether the hydrogen gas detector is working normally, and the inspection cycle should be kept at least within 3 months.
To sum up, it is the post-maintenance precautions of the hydrogen detector. It is suitable for gas leakage rescue in explosion-proof places, underground pipelines or mines, etc. It can effectively ensure that the life safety of the staff is not violated, and the production equipment is not damaged. After all, where there is hydrogen, hydrogen explosion accidents may occur, whether it is very likely or not, but we must take safety precautions to prevent the concentration of hydrogen in the working environment from being too high, reaching the lower limit of hydrogen explosion and causing fire and explosion Accidents and even casualties.
