(1) Before using the test pen, first check whether there is a safety resistor in the test pen, and then visually check whether the test pen is damaged, whether it is damp or water, and can only be used after passing the inspection.
(Principle: There is a resistance in the test pen, and there is a light-emitting body - a neon tube. The key lies in the neon tube. After the resistance is reduced, there is a voltage to one end of the neon tube, forming a high potential. Your hand needs to touch the metal at the end of the pen. end, now you are the ground wire. There are two thin metal wires in the neon tube, which are very close to each other, but they are not connected. The neon tube is naturally filled with neon gas. Light discharge. If the voltage is too large, the neon tube will be broken down instantly. At this time, the neon tube will act as an insurance and will not cause too much damage to you. Low voltage will be more dangerous, because the traditional electric pen, the neon tube electric pen, operates at 100V. It will only light up from the left and right, so don’t be careless, and don’t let the electric pen get into the water, otherwise you will know the feeling of electric shock.)
(2) When using the test pen, do not touch the metal probe at the front of the test pen with your hands, as doing so will cause an electric shock accident.
(3) When using the test pen, be sure to touch the metal part of the end of the test pen with your hand, otherwise, because the charged body, the test pen, the human body and the earth do not form a circuit, the neon bubble in the test pen will not emit light, resulting in misjudgment. It is very dangerous to think that a charged body is not charged.
(The luminous voltage of the neon tube is above 70V, and the series resistance is 500K. When testing the voltage of 220V, the maximum current flowing through the human body is: I=(220-70)÷500=0.3mA and the human body only passes the current of 1mA. Feeling numb.)
(4) Before measuring whether the electrical equipment is charged, first find a known power source to test whether the neon bulb of the electric pen can emit light normally, and it can be used normally.
(5) When testing a charged body under bright light, special attention should be paid to whether the neon bulb really glows (or does not glow), and if necessary, the other hand can be used to block the light to judge carefully. Don't make a misjudgment, judge that the neon bulb is not emitting light, and judge that there is electricity as no electricity.
AC Voltage Tester Pen GD116B :
Pls Clink Below Photo and Read more details about this AC Voltage Tester Pen GD116B :
