Preparation work before using the ph meter
ph meter preparation before use
1. Before using the PH meter, wash the electrode with triple distilled water, and be careful not to break the glass electrode.
2. Prepare to put the NAOH solution and HCL solution for adjustment next to the platform PH meter.
3. Take out the fixed PH solution (PH=7.0) in the refrigerator and put it on the platform.
4. Turn on the PH meter, adjust the PH value, press the ︿﹀ key to select the PH and CAL options, select the CAL item among them, adjust and insert it into the PH solution (PH=7.0), press the " " key to select the data value to 7.0 , A small octopus can appear.
5. Insert the glass electrode into the solution to be tested, then put another electrode, and stir the liquid surface properly (note: do not break the glass electrode).
6. When using the electronic unit of the PH meter, attention must be paid to the protection of the circuit. When the PH value measurement is not being performed, the input of the PH meter should be short-circuited to avoid damage to the PH meter.
7. The glass electrode socket of the PH meter must be kept clean, clean and dry, and must not be exposed to harmful gases such as salt spray and acid mist. At the same time, it is strictly forbidden to have any aqueous solution on the glass electrode socket to avoid high input impedance of the PH meter.
8. When the PH value you need is not reached, be careful to add NAOH solution and HCL solution.
9. Be careful not to exceed the required fixed volume when adding liquid.
