Routine maintenance and care of optical microscopes
1,Operate the microscope according to strict procedures and instructions.
2,When moving the microscope, it is better to hold the base, do not tilt it, and hold it lightly.
3, in the observation, do not move the microscope.
4, microscope optical parts, can not just touch with your fingers, should be special wipe lens paper wipe.
5, when converting the objective lens, should turn the converter, and do not move the objective lens. At the same time, do not arbitrarily turn the focusing handwheel, use the rotation should be slow and light.
6, the use of high-magnification objective lens, in order to avoid damage to the objective lens and slide, do not move the distance too large.
7, do not disassemble the microscope parts or objective lens, in order to avoid damage to the microscope.
8, microscope need to check the objective lens after use, will be the lens, the carrier table and so on wipe clean, put into the box to save.
9, microscope in the preservation is, good in a dry, clean environment, to avoid dust and chemicals staining.
Microscope is mainly used in which fields?
Metallurgical microscope in industrial measurement, precision is greater than the image measuring instrument, generally for the measurement of parts with high precision to be metallurgical microscope to solve.
Metallographic microscope is applicable to the site of a variety of large-scale workpiece metallographic examination, failure analysis of the microscope, it does not need to cut the sample, directly on the workpiece grinding, polishing, thus ensuring the integrity of the workpiece. The base of the microscope has a magnetic suction base, directly adsorbed on the workpiece to observe the organisation of the on-site metallographic examination.
Metallographic microscope is suitable for aviation manufacturing, machinery manufacturing, vehicle manufacturing, boiler and pressure vessel manufacturing and inspection, petrochemical, railway, shipbuilding, power plants, power stations, equipment installation, large-scale moulds, detection, quality supervision, physical and chemical laboratory and other industries.
Metallographic microscope can also be widely used in factories, laboratories for casting quality identification, raw material inspection or material treatment after metallographic organisation research and analysis work.
