Seven common problems of VOC gas detectors!
Among the various gas detectors supplied, there are various gas detection equipment. Among them, this VOC gas detector is used to detect the gas concentration of VOC concentration in the environment. The gas sensor carried by this type of gas detector is mainly PID gas. There are many kinds of sensors, such VOC gas detectors Shanghai Zuoqiang Industrial supplies.
From environmental monitoring, to electronics factories, to petrochemical projects, people often fall victim to the shortcomings of gas detectors. How to use them more safely and effectively? Let's take a look at the seven common problems of VOC detectors.
1. Calibration failure
Harsh environments and mechanical shocks can damage the VOC detector. Gas concentrations assumed to exceed the detectable design will damage the sensor. Filter membranes and sensor ports can also be severely affected by contamination from liquids, dirt, and dust.
2. Rapid detection failure
No matter how the gas concentration in the air changes, if the sensor and filter membrane are damaged, the degree will not change. In order to ensure the normal operation of the detector, it is necessary to perform rapid detection on time.
3. The risk of moving makes the job more difficult
Temporary area monitoring or the setting of on-site warning areas make mobile operations in known risk environments no longer scary.
4. The detector cannot cope with extreme environments
The oil and gas production environment of the VOC detector is extremely harsh, the temperature difference changes greatly, and it is exposed to seawater and hot and humid environments for a long time, which poses a serious challenge to the stability of the detector.
5. Messy user interfaces are time-consuming and labor-intensive
Impersonal operation interface and messy operation and maintenance work lead to an increase in cost and a decrease in field work efficiency.
6. Ignore the shortcomings and report to the police
VOC detector fault alarms need to be fully paid attention to and reduced to avoid the time and money cost incurred, and to improve the detector operating efficiency.
7. Ignore data
VOC detector data analysis, including alarms and faults, is necessary for operators to guess risks and ensure safety.
