Soldering iron electric wire broken repair method
Soldering iron electric hot wire broken here give two kinds of treatment methods, simple repair method is to break the broken place stranded, fast and reliable treatment method, is to take out the electric wire from the tube, first remove the oxides near the break, and then tightly stranded. Soldering iron electric heating wire broken processing method
Soldering iron common failure is the electric hot wire broken.
A simple repair method: the broken place twisted, but this connection is often due to the contact loose and sparks, and not long, the contact is broken. Recommended: how to use a soldering iron?
Second, fast repair method: the electric wire from the tube, first remove the oxides near the break, and then tightly twisted, twisted around the joints in the joints sprinkled with a small amount of glass and electric porcelain powder mixture (will be ground according to the two 6:1 and become), loaded, energized for a few minutes, the powder will be melted and adhered to the point of contact. Repair in this way, the contact will not appear sparks, and also more durable.
There is a fast and reliable repair method: the electric wire from the tube out, first remove the oxides near the break, and then tightly twisted, twisted around the joints in the joints sprinkled with a small amount of glass and electrical ceramic powder mixture (will be ground according to the two 6:1 and become), mounted, energized for a few minutes, the powder will be melted and adhered to the joints. Repaired in this way, the joint will not appear sparks, and also more durable.
