Soldering iron temperature setting
1. The temperature is determined by the actual use, and it is most suitable to solder a tin point for 4 seconds. Usually observe the tip of the soldering iron, when it turns purple, the temperature setting is too high.
2. For general in-line electronic materials, set the actual temperature of the soldering iron tip to (330~370 degrees); for surface mount materials (SMC), set the actual temperature of the soldering iron tip to (300~320 degrees).
3. For special materials, the temperature of the soldering iron needs to be specially set.
4. Microphones, buzzers, etc. should use silver-containing tin wire, and the temperature is generally between 270 and 290 degrees.
5. When soldering large component feet, the temperature should not exceed 380 degrees, and the power of the soldering iron can only be increased.
