Specifications of electric soldering iron tips
1, Type I
Characteristic: The tip of the corresponding soldering iron tip is very small.
Application scope: This specification of soldering iron tip is very suitable for fine soldering, and it can also be used in places with relatively small soldering spaces.
2, B-type/LB type
Characteristic: This B-type soldering iron tip does not have a certain directionality and can be soldered to the entire front end of the soldering iron tip. LB type can be said to be a type of B-type. These two specifications of soldering iron tips are very flexible.
Application scope: This specification can be used for general welding, regardless of the size of the solder joint.
D-type/LD type
Features: Welding is carried out using a nozzle section.
Application scope: Suitable for welding environments that require a large amount of tin, such as welding environments with large welding areas, thick terminals, and large solder pads.
3, C-type/CF type
Features: The inclined surface at the front end of the soldering iron tip is used for welding treatment, which is very suitable for multi tin soldering.
Application scope: It can be used for soldering that requires a large amount of tin, such as environments with large soldering areas.
4, K-type
Features: Using a blade shaped part for welding, it can be used for both vertical and pull welding, and is a versatile soldering iron tip.
Application scope: It is very practical for repairing tin bridges and soldering connectors.
5, H-shaped
Characteristic: The corresponding tin plating layer is located at the bottom of the soldering iron tip.
Application scope: QFP can be used for some SOPs with larger welding tooth pitch for pull welding.
