Structure of a Stereo Microscope
Stereo Microscope Technical Parameters
1. The microscope is a continuous zoom with a zoom ratio of 6.3:1
2. Objective zoom range: 0.8X—5X.
3. See the table below for the total magnification and actual field of view
4. The binocular observation tilts 45 degrees, and the adjustment range of the interpupillary distance is 52-75mm
Precautions for Stereo Microscopes
1. The temperature of the microscope installation location must be between 0° and 40°, and the relative temperature should be <85[%].
2. The stereo microscope should be installed in a place where it will not be disturbed by vibration.
3. The stereo microscope should be installed in a clean and dust-free place
4. The microscope is a precision optical instrument. Please protect it carefully from impact and vibration. If it is subjected to impact vibration or rough treatment during transportation or operation, it will easily damage the instrument.
5. Don't let the lens accumulate dust, leave fingerprints, etc. Smudges on the lens will seriously affect the observation of the image. When dust is accumulated on the lens, it should be cleaned as follows:
6. Blow off with a dust blower. If you can't blow it clean, you can try to wipe it off with a soft brush.
7. Only when there are fingerprints or oil stains on the lens, it is necessary to gently wipe off the stains with a clean soft cotton cloth slightly touched with absolute alcohol. Do not reuse the same section of cotton.
8. When using the microscope, be sure to handle it with care, and be careful not to touch any optical parts with your hands.
9. To wipe any optical part, use special lens cleaning paper.
11. When it is difficult to turn any knob, you must not use too much force, but you should investigate the cause and eliminate the obstacle.
12. The microscope should be stored in a place with low humidity and should not cause mold. The microscope should not be stored in a place where it will be directly exposed to the sun or a place with high temperature and high humidity. During storage, it is advisable to wrap the entire device with plastic cloth to prevent dust from accumulating.
