Technical principle of X-ray fluorescence coating thickness gauge
Principle of X-fluorescence coating thickness gauge
The principle of the XRAY thickness gauge is to convert and measure the thickness based on the intensity attenuation of the XRAY penetrating the object to be measured, that is, to measure the amount of X-rays absorbed by the steel plate under test, and determine the thickness of the object to be measured based on the energy value of the X-rays. . The received signal is converted into an electrical signal by the X-ray detector, amplified by a preamplifier, and then converted into an actual thickness signal by a dedicated thickness gauge operating system that is displayed to people intuitively.
Application scope of X-ray fluorescence thickness gauge
XRAY thickness gauge is suitable for enterprises that produce metallurgical materials such as aluminum plates, copper plates, steel plates, etc. It can be matched with rolling mills and used in hot rolling, cast rolling, cold rolling, and foil rolling. Among them, the XRAY thickness gauge can also be used to automatically control the thickness of the plate during the production process of cold rolling, foil rolling and partial hot rolling mills.
Introduction to X-ray fluorescence coating thickness gauge:
The X-ray film thickness tester can be used for the measurement of alloy electroplating or multi-layer electroplating including lead-free solder. It can provide accurate, fast and simple element analysis, as well as electroplating solution analysis, and has a wide range of applications. Using Microsoft's Office operating system, inspection reports can be printed out easily and quickly.
Just press the laser focus button to focus automatically. When measuring samples with height differences, an automatic stop function is configured to prevent collision between the sample and the instrument.
The X-ray film thickness tester is mainly an X-ray system based on core control software for coating thickness measurement and material analysis. Using a new mathematical calculation method, FP (Fundamental Parameter), DCM (Distenco Controlled Measurement) and powerful computer functions are used to calculate the coating thickness. With the enhanced software functions, the procedure for measuring more complex coatings is simplified and can even be Without the need for standard pieces, the measurement is the same.
Product advantages of X-ray fluorescence coating thickness gauge:
1: Compact structural design improves efficiency and accuracy.
2: Using a semiconductor receiver, the resolution, stability and sensitivity are several times higher than that of traditional brand scale receivers, and the accuracy is more than 30% higher than that of traditional X-RAY. It performs more outstandingly in testing thin gold (Au).
3: Able to measure electroplated layers, coatings, films and liquids containing typical elements with atomic numbers from 17 to 92. It can distinguish materials and qualitatively or quantitatively measure the composition percentage of alloy materials. It can measure up to 5 layers at the same time and analyze up to 25 components.
4: A variety of primary filters and collimators to meet different needs.
5: Variable focal length adapts to complex sample measurement needs.
6: Modular design makes repair and maintenance easier.
7: Simple setup and only requires a USB cable to connect to the computer.
8: Small space occupied and lightweight design.
