Ten maintenance methods for anemometers
During the use of the anemometer, some problems may occur due to operational and environmental issues, which will have a certain impact on the normal use and performance of the anemometer. This article specifically introduces some routine maintenance methods for anemometers, hoping to help users better apply anemometer products.
1. It is prohibited to use the anemometer in a flammable gas environment.
2. It is prohibited to place the anemometer probe in flammable gas. Otherwise it may cause fire or even explosion.
3. Please use the anemometer correctly according to the requirements of the instruction manual. Improper use may result in electric shock, fire and sensor damage.
4. During use, if the anemometer emits a strange smell, sound or smoke, or liquid flows into the anemometer, please turn off the battery immediately. Otherwise, there is a risk of electric shock, fire and damage to the anemometer.
5. Do not expose the probe and anemometer [2] to rain, otherwise it may cause electric shock, fire and personal injury.
6. Do not touch the inner sensor part of the probe.
7. When the anemometer is not used for a long time, please remove the built-in battery. Otherwise, the battery may leak and the anemometer may be damaged.
8. Do not place the anemometer in places with high temperature, high humidity, dust and direct sunlight. Failure to do so may result in damage to internal components or reduced anemometer performance.
9. Do not use volatile liquids to wipe the anemometer. Failure to do so may cause deformation and discoloration of the anemometer housing. When there are stains on the surface of the anemometer, please wipe it with a soft cloth and neutral detergent.
10. Do not drop or press the anemometer. Otherwise, the anemometer may malfunction or be damaged.
11. Do not touch the sensor part of the probe while the anemometer is charging. Otherwise, the measurement results will be affected or the internal circuit of the anemometer will be damaged.
